Instead, use plastic clips. There are a variety of clips that let you hang Christmas lights without causing damage to your roof or sides of your home. They work by clipping onto the gutters, shingles or eaves of your home. There are different types of clips for different types of roofs and different types of lights.
Do people staple Christmas lights to their roof?
Don’t use Staples, Hammers, or Nails Many homeowners think that using staples or nails will hold the lights more securely, but it’s at the cost of the roof. You should never nail, staple, or puncture any part of your roof to hang Christmas lights.
Can I staple Christmas lights to siding?
Tips for Hanging Lights on Siding When hanging lights and holiday decorations on your home’s exterior, avoid nails, staples and glue ‚Äî this can easily damage your siding and trim.
How do you hang lights without damaging shingles?
Avoid Using Nails and Staples Instead, try using Christmas light hanging clips. These allow you to turn lights directly onto the roof without causing any damage or creating holes that let in water. You can usually find these types of fasteners at your local hardware store for a few dollars each.
How do you secure Christmas lights to shingles Related Questions
How do you secure Christmas lights to roof tiles?
Clay Shingle Tiles: Lights can be attached to slate, flat or barrel style roof tiles using a tile roof clip. Simple and quick install: the light clips to one end, and the other end clips to a roof tile. Ridges built into the clip help to hold it in place without applying enough pressure to damage the roofing tile.
Do Christmas light clips ruin shingles?
Lighting manufacturers make clips that slide under the shingle bed. These not only are safe to use on shingles but also elevate the light off the shingle itself so that the heat doesn’t cause warping or other damage to the surface of the shingle.
How do you attach Christmas lights without gutters?
One approach is to simply attach your lights to your shingles rather than your gutters. If your Gutter Helmet is installed underneath your shingles, then most traditional shingle clips will work as intended.
Can I staple outdoor lights?
staples to attach the string lights closest to the power source. Unplug the cord from your outlet. Pull the cord taught, but not tight, and continue stapling the string lights along your path. Keep the string centered and make sure you don’t staple through the wiring!
How do you hang Christmas lights on shingles without a ladder?
There are a few ways to hang Christmas lights without a ladder. The first is a simple solution, a light- hanging pole. To use these poles, you attach the clip to the lights then place the clip in the pole’s grip. Then, you simply extend the arm and hook the clip over the gutter.
Can you staple into vinyl siding?
Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding.
Is it OK to screw into shingles?
The manufacturers of your home accessories may not warn you against nailing them to the roof because they might not understand roofing materials and why you shouldn’t attach accessories to them. The truth is, you can increase your risk for leaks if you try to attach something to your roof without professional guidance.
What will stick to shingles?
Any good quality brand of asphalt plastic cement will work, and can be applied from a can or caulking tube. Never apply more than a small spot of adhesive, as excess solvents in the cement may soften the shingle coating, resulting in the formation of blisters.
How do you hang Christmas lights on siding?
Vinyl siding clips are the best solution. Simply slide the clips under the vinyl siding, and you’re ready to decorate. The stainless-steel clips are easy to reposition, and they won’t rust or stain your vinyl siding. Once the holidays are over, removal is easy and damage-free.
What is the safest way to put lights on a roof?
Roof peak clips make hanging lights easier and protect your roof. They slip under the ridge cap or the last row of shingles and hold the lights securely in place. They should be spaced out, so one clip holds each bulb. Install the clips before bringing the lights up to the roof.
How do you hang Christmas lights on a standing seam roof?
You can use an inexpensive product called a C9 clip. This inexpensive fastener will turn all of your Christmas lights into magnetic lights. You simply string your lights into the magnetic C9 clip, and the clip can be attached directly to your metal roof.
What do you attach string lights with?
Use cable clamps, cup hooks, or other hardware to attach your string lights. One of the most common ways to attach string lights is to use cup hooks or Q hooks from Amazon. You can also use coaxial staples, which are available on Amazon. This hardware behaves like hooks.
How do you clip rope lights to a roof?
Decide Where You Want to Hang Your Lights. Figure Out How Much Rope Lighting You Need. Install Plastic Cable Clips. Place the Rope Inside the Clips. Nail Down Your Cable Clips. Plug in Your Rope Lights. Turn on Your Lights and Enjoy!
Can you hang lights on shingles?
Generally, all-in-one clips are the best option if you’re hanging lights from your shingles or gutters. That being said, it’s generally not a good idea to hang any lights directly from your shingles if this can be avoided.
Can you use crown stapler on shingles?
A pneumatic medium crown stapler can also be used to install the shingles. Nails are available in longer lengths, which may be necessary if you are installing over rigid insulation. Nails are also available as ring shank nails, which may hold better.
Can you put metal on shingles?
The answer is, YES! One big advantage to metal roofing is that it is light weight, which makes it the perfect material to be installed over an existing shingle roof.