It’s absolutely fine to install a metal roof over shingles. People are accustomed to thinking of metal roofs as being heavy or cumbersome. In fact, metal roofs are so beneficial because they’re very light. They’re fast to install, and they come in large sheets rather than individual tiles.
Can you put steel directly over shingles?
Yes, it’s possible to put metal roofing over shingles. Before you get started on your project, though, you will need to check with your local building department to see if they’ll allow you to. Some areas will only allow re-roofing over one layer of shingles while others will allow over two layers.
Do you have to remove shingles before installing a metal roof?
Metal roofs can be installed over your existing roof without tearing off shingles, provided local building codes allow it. While shingle removal is the preferred route, tear-off is messy and raises the cost of the job. A potential problem with this type of installation is trapped water vapor.
How do you install a metal roof on an existing shingle roof?
Inspect Plywood. It’s important to first inspect the plywood under the asphalt shingles to make sure it is in good condition. Install Synthetic Underlayment. Add Insulation. Install Corrugated Metal Panels.
What happens if you put a metal roof over shingles Related Questions
What are the pros and cons of putting metal roof over shingles?
A big reason people install metal roofs is because they are mildew and rot-resistant. But if moisture can get between your metal roof and your existing asphalt shingles, that great benefit is non-existent. Moisture between your roofing materials will still lead to mold, mildew and rot.
How long does metal roof over shingles last?
Metal roofs offer many benefits, including: Longevity. Metal roofs can last 40-70 years, depending on the material. Traditional asphalt roofing materials have an estimated life expectancy of roughly 12-20 years.
How much does labor cost to install a metal roof over shingles?
Metal roofing cost an average of $13,200 to install on a 1,700-square-foot roof. It is important to note that more than two-thirds of the price often goes toward materials alone. You’ll pay anywhere from $1 to $25 per square foot for metal roofing materials plus another $2 to $14 per square foot for labor.
Can you put metal roof over shingles without furring strips?
It is not recommended to install metal roofing over shingles without furring strips. The thermal expansion and contraction of the metal will rub against the shingle granules and the metal will corrode from the underside. The gaps introduced by furring strips also allow air venting which can reduce moisture.
Can you put steel over 2 layers of shingles?
Many metal roofing systems can be installed over 1-2 layers of existing asphalt shingles, saving time, labor, and landfill costs.
Do you need to put anything under a metal roof?
Yes, metal roofing absolutely needs underlayment. Felt and synthetic underlayment are great options for asphalt roof systems.
Do you have to sheath under a metal roof?
Some might choose to skip using underlayment to save money. However, the metal roof underlayment acts as an added layer of protection. You can save money by using underlayment because it will help you avoid problems that would need to be fixed. The short answer is yes, your metal roof does need underlayment .
How many layers of shingles can you put metal over?
One to two shingle layers can rest safely and securely under a metal roof. Any more than two layers could reduce the stability of your roof. Many building safety codes will not allow more than two layers, so check your local areas before making an installation.
How do you vent a metal roof over shingles?
To vent the roof, holes are cut in the old roof (Detail 1) above the soffit, which pulls air through the soffit vents underneath. Cool outside air then travels under the shingles to the vented ridge (Detail 2), pulling out moisture and heat.
What is the best underlayment for metal roof?
30# felt underlayment (or two layers of 15# felt) are recommended for metal roof panels. Felt is an all-over roofing accessory made of a natural (wood cellulose, natural fibers, etc.) or synthetic (polyester or fiberglass) base that is then saturated in asphalt to make it water-resistant.
Which is easier to install metal roof for shingles?
Shingles typically have a lower price because they are easier to install. Metal roofs, on the other hand, take more specialized knowledge to install, and the material itself is more expensive.
Is it cheaper to put a metal roof on or asphalt shingles?
Metal roofing generally costs a bit more per square foot than asphalt shingle alternatives, sometimes by a magnitude of two or three. Metal roofing typically costs between $8 and $16 per square foot, according to estimates taken from early spring of 2021.
Which is cheaper a metal roof over shingles?
Shingle roofs are cheaper up front. Metal roofs generally can run from $120 to $900 per 100 square feet (one 10-foot by 10-foot area, or a ‚Äúsquare‚Äù of material), while asphalt shingles will be between $100 and $200 per 100 square feet. Its installation will also run you more for metal since it’s a more specialized job.
Are metal roofs noisy when raining?
This is one of the most frequently asked questions we hear from homeowners interested in metal roofing, so we’ll get right to the point‚Äìno, metal roofs are not loud in the rain.
Do metal roofs attract lightning?
Extensive research has proven that metal roofing is no more likely to attract a lightning strike than any other type of roofing material. In fact, as a non-combustible material with the highest Class A fire-resistance rating, metal roofing is one of the best materials for homes in lightning-prone regions.
Do metal roofs rust over time?
With advances in paint systems, finishes, and other technologies, metal roofs will withstand oxidation and rusting for most of its lifetime. However, there can be factors that affect whether or not your roof rusts. If you have plain, bare steel for example, it will rust.