The standard pleat sizes are 3/8‚Äù, 3/4‚Äù, 1 1/4‚Äù and 1 1/2‚Äù. If the bottom rail measures closer to 1‚Äù, this is a 3/8″ pleat or pleated shade. If the bottom rail measures closer to 2‚Äù, like in the photos, this is a 3/4‚Äù pleat. If the bottom rail measures closer to 3‚Äù, this is a 1 1/4‚Äù or 1 1/2″ pleat.
How are cellular shade sizes measured?
Simply measure the height of the window in three places, including the top left, the middle, and the top right, all ending at the bottom of the sill. You’ll use the largest of the three measurements and add the recommended minimum of 4 inches. This will ensure the window is properly covered.
What is the difference between 3 4 and 3 8 cellular shades?
The cells come in different sizes, from 3/8 inch to 9/16 inch. The larger the cell, the more air space and the potential for greater insulation value. So a 3/4-inch shade will provide more insulation than a 3/8-inch shade, but the larger shades are usually more expensive.
How do you measure shade size?
Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
What is shade pleat size Related Questions
What is most popular size of cellular shades?
Medium Cell Sizes If you have a medium-sized window and are looking for a cellular shade that reflects that size, go with 1/2″ or 9/16” cell sizes. These sizes are the most popular because they provide good balance for all sizes of window, all without being too overwhelming.
What are the different sizes in cellular shades?
We’ve organized the cell measurements into three categories: Small (3/8‚Ä≥), Mid-Size (9/16‚Ä≥ and 1/2‚Ä≥), and Large (3/4‚Ä≥) to help you understand what these numbers really mean when it comes to your window.
What is the maximum width for cellular shades?
Honeycomb shades can be made up to 144″ wide and in almost any shape you can think of‚Äîfrom circles to triangles and more.
Should cellular shades be wider than window?
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Can you cut cellular shades to size?
You can only cut a shade down to the roller. If you need the shade narrower than that, you’ll have to get a smaller shade.
Are pleated shades the same as cellular shades?
Cellular shades provide more energy efficiency than pleated shades because of their honeycomb construction, which you can see when you look at them from the side. Pleated shades look the same as cellular shades from the front, but do not offer the insulating honeycomb design.
What is the difference between honeycomb and cellular shades?
A cellular shade has a more complex construction. Also called “honeycomb shades,” cellular shades have geometric folds that resemble honeycombs. Cellular window shades are available with both a single layer of these honeycombs and a double layer, called “single cell” and “double cell,” respectively.
Are cellular shades the same as honeycomb?
The truth is there is no difference. Honeycomb shades are the same as cellular shades in Olympia. You may also see the names “honeycomb blinds” and “cellular blinds.” All the names are interchangeable. The difference is going to depend on the age or demographic of the people selling the products in a lot of cases.
How much space should you have on the side of cellular shades?
We recommend 1¬Ω” overlap on each side of the window (3″ total) for optimum light control and privacy.
Can people see through cellular shades at night?
Most Cellular Shades Won’t Block All the Light So, cell shades tend to darken the room by filtering the light. On a night, this means some light will still be visible from the other side of the shades. People will be able to tell if you’re in or not based on the light that they can see.
What material is best for cellular shades?
Bonded fabrics provide greater insulation. Bonded fabrics are dust and stain resistant. Bonded fabrics are easy to clean.
What is shade diameter?
Lamp shades are sized by measuring cross the diameter at the bottom of the shade – so if the shade diameter measures 25cm across the bottom, then it is known as a 25cm shade.
What do shade dimensions mean?
The width of a fixture is the widest part of the base or stem. Shades are described by their height measurement; for example, a 16-inch shade is 16 inches from the bottom edge to the top edge, measured up through the shade. The width of the shade is the widest part of the shade.
How do you measure shade percentage?
The percentage depth of shade can thus be defined as parts by weight of dyestuff to be added to a dye bath per 100 parts by weight of the material. Hence, 50 ml of 1% dye solution will be required for getting 5% shade on 10 gm of cotton.
What is better single or double cellular shades?
Double cell material is your best bet when comparing single vs. double cellular shades for energy efficiency. All cellular shades insulate your windows by trapping air in pleated pockets. This air acts as a barrier against outside temperatures to keep your home comfortable.
What are neat pleat shades?
Neat Pleat® shades have extra support on the back to prevent any sagging or flattening over time.