Adding a second layer of shingles on top of the existing roof would double the weight and cause the roofing structure to wear down a lot faster. Unless you are a hundred percent certain that the roofing structure is capable of handling the weight of a second layer of shingles, do not opt for re-roofing.
Can you put a new roof over an old roof?
Roofing over an existing roof is also called reroofing or an overlay. It is the process where roofers install a new roof over your existing one, i.e. add a new layer of shingles, which means that there is no tearing off of the old roof.
How many times can you put shingles on top of shingles?
As mentioned above, homeowners are legally limited to two layer of roof shingles. Therefore, if you already have two layers, you’ll need a full tear-off. Additionally, if your roof is severely damaged, it likely won’t be able to support the weight of a reroof and will need to be torn off.
How do you blend old shingles with new roofs?
If you’re looking to blend new and old shingles, saving shingles from your original roof installation is an excellent first step. If fading isn’t dramatic, your contractor may be able to achieve a uniform look with the same materials. If shingles have faded, try going a shade lighter with the same manufacturer.
Why not to shingle over existing shingles Related Questions
Is overlapping shingles bad?
When weighing the pros and cons of purchasing a new roof, take extreme caution if you are considering adding multiple layers of asphalt shingles to your roof. More than likely, you will compound problems, create an unsafe weight load on your roof, and it will end up costing you more in the long run.
How many layers of shingles can you put on?
Well, according to most building codes, you can have a maximum of two layers of shingles on your roof. Furthermore, based on the condition of your roof, you get to decide whether you need a complete roof replacement or just add a new layer of shingles on top of the existing ones.
How long does a roof overlay last?
An overlay is a viable option if the existing roofing materials have not already been overlaid. Home Reference.net notes that on average you can expect the overlay to last for fifteen or sixteen years.
What is the difference between roof overlay and tear off?
Tear-off roofs are when a roofing contractor removes, or “tears off,” your existing roof, then installs an entirely new one. Overlay roofs are when a roofing contractor keeps your existing roof as-is, then places new roofing materials on top of it.
How many times can you go over a roof?
At maximum, you can safely layer up to two layers of organic or fiberglass asphalt shingles for roofs with up to an 18.5-degree pitch. Any more than two layers adds too much weight to your roof. Some local building codes don’t allow overlaying at all; in those municipalities, you can only have one layer of shingles.
Is it OK to have 3 layers of shingles on a roof?
No, you can’t put three layers of asphalt shingles on a roof. In most states, you’re only allowed to have two layers of asphalt shingles on a roof for fire safety reasons.
Can you have too many layers of shingles on a roof?
Having multiple layers of shingles is going to make your roof hotter because the heat gets trapped between the layers, which could mean premature aging of the shingles. This is especially true if you’ve overlayed your new shingles on top of warped shingles.
What is one of the drawbacks to adding a second layer of roofing over a first?
One drawback of adding a second layer of roofing over the first is the inability to inspect the roof decking for damage, potentially leading to undetected issues that could worsen over time.
Why do my new roof shingles look wavy?
What Causes New Roof Shingles to Look Wavy? A few culprits cause shingles to look wavy or rippled, including problems with the plywood or felt underneath the shingles, issues with expansion in extreme temperatures, misaligned shingles, or just generally poor craftsmanship.
What goes under new shingles?
Directly beneath the shingles is something called “underlayment,” also known as “roofing felt.” As you may have guessed, underlayment is usually either made of fiberglass paper or felt. It covers the entire roof deck.
Can you replace just a few roof shingles?
If you only need to replace a few shingles, your contractor may be able to replace them successfully. However, it’s likely to cost less than your insurance deductible, so you can expect to cover the cost out of pocket. Sometimes your insurance company will replace the entire roof when shingles are missing.
Is a roof overlay worth it?
Advantages. Lower costs ‚Äì Because there’s so much less labor involved in simply installing new shingles over old ones, an overlay will cost you less than a tearout. Your roofer won’t need to rent a dumpster and deal with debris disposal regulations, so you’ll save on costs there, too.
Is overlaying a roof bad?
An overlay roof will have a shorter lifespan than the average asphalt roof. Since an overlay roof is made up of two layers of shingles, it traps much more heat and is prone to issues that can occur between the two layers.
What are the cons to 2 layers of shingles?
Damage repairs: Two layers create a more complicated roof system. Decreased lifespan: A double-layer roof will not last as long as a single layer. Removal costs: When the time comes to replace your roof, having two layers will require more manual work.
Can you put a layer of shingles over shingles?
Are you wondering if you can roof over existing shingles? The simple answer is that yes, you can.
How long can you leave bundles of shingles on a roof?
Theoretically, there is no shelf life on shingle products in the bundle. However, there may be a tendency for an asphalt shingle to stiffen if stored for more than one year. Should a shingle be used after one year’s storage, care should be taken while handling as the shingle may have stiffened over time.